IMALENT DDT40 2016 Version Cree XM-L2 LED Intelligence Touch Led Flashlight with Batteries and Charger
Availability: In stock
Imalent DDT40, multi-functional touch screen controlled flashlight, utilizes 6 LEDs to offer a broad range of illumination options and power display function. Output up to 4500lumens+1180lumens lumens creates intense area lighting combined with long reach. Idea for group leaders needing high output and multiple beam patterns, the DDT40 is a powerful addition to a team's onsite lighting tools with instant high, strobe and SOS.
Imalent DDT40 LED Flashlight, Integrated camera-style tripod mounting point conveniently attaches to standard tripods for use as fixed outdoor area or photography light
Utilizes 4pcs CREE XM-L2 U4 LED,and 2 pcs XP-L LED with a lifetime of up to 50,000 hours
Backlit touch screen panel facilitates convenient and discreet and infinite brightness adjustment.
Digitally regulated output - maintains constant brightness
Electronic reverse battery protection
Battery capacity indicator
Optimized deep metal reflector maintains great throw distance and spread with an ideal beam pattern
Dimensions:139mm(length) x68mm(head diameter)x50mm(tail diameter)
Aerospace-grade aluminum alloy body
Military Specification Type III- hard anodized
Ultra-clear tempered glass lens resists scratches and impacts
Accessories:O-rings, Holster, Screen protector
Included in the package
1x Imalent DDT40 LED Flashlight
2x Spare O-rings
1x Screen protector
4x Imalent 2600mAh Batteries
1. Battery installation
Unscrew the tail cap. Insert 4pcs 18650 rechargeable Li-ion batteries or 8pcs CR123A (3.0V) batteries into the flashlight with the positive (+) towards the head. Replace the battery tube.
2. OLED Screen
When the DDT40 is turned on, the OLED display will activate automatically and show lumen output, battery voltage, battery status, compass and approximate temperature. After displaying this information will remain on lumen output and 30 seconds later the OLED display will turn off automatically if without action on the right mode switch. The display can be reactivated by pressing the small right mode button.
3. Mode transfer
With the spot light on, softly press the left mode button to transfer between spot and flood light; press and hold the button for more than 0.3 seconds each time to enter strobe - beacon - SOS, softly press the left mode button again to quit special mode (include strobe, beacon and SOS).
4. Brightness selection
Insert batteries, press power switch one time, will get turbo output, the flashlight will change to high output automatically 3 minutes later to protect circuit and LED. With the light on (spot or flood), press and hold the upper button '+' on the top of the touch screen, the brightness will increase itself, while press and hold the bottom button '-' on the touch screen, the brightness will decrease itself, release your finger at any output you need, will save it.
5. Remote control operation
With the light on, put the remote controller towards any receiver on both sides of the flashlight head, press power switch on the remote controller to turn on and turn off the light, pressing mode button to transfer the light from main spot light to flood light to red light, press button to increase the brightness while press button to decrease the brightness，release your finger at any output level will save it.
6. Lock and unlock the touch screen
Simple click the power switch button to lock or unlock the touch screen.
7. Low-power warning
When the battery symbol on the OLED display blinks rapidly, it indicates the remaining power can last only 15 minutes, need to replace the battery
- Imalent DDT40
Quality Delivery Time Price