Facebook Pixel

LAUNCH CRP123 OBD2 Automotive Scanner ABS SRS Airbag Transmission Engine Car Diagnostic Tool Multi-language

$159.95
In stock
SKU
865054672951
 

Introduction :

CRP123 features the unique and 3.5 inch TFT color display, the CRP 123 OBDII/EOBD code readersupports all 10 modesof OBDII test for a complete diagnosis. It is truly the ultimate in power .and affordability, allowing users to do their jobs faster. Graph, Record, Replay data and troubleshooter codetips help users to save diagnosis and repair time.
CRP123, the most advanced and multifunctional code reader powered by its exclusive technology aredesigned for technicians to troubleshootfour systemsfor most of the major vehicle on the road today ,but come with the added benefits of read DataStream for 4 systems and vehicle diagnostic report.

For Engine System Diagnostic:The diagnostic tool can help detect the engine ignition, fuel injection, air and fuel ratio, and exhaust emission conditions in Engine system to enhance vehicle performance, save energy and reduce exhaust emission.

For Transmission Diagnostic:It makes great sense in the safe driving when your car is slipping or difficult to shift. This diagnostic scanner can figure the problems out via reading codes in the Transmission system, or check the health status via live data viewing.

For ABS System Diagnostic:Diagnosing an ABS problem should always start with a visual inspection of all brake components, next you will need to retrieve ABS codes to tell you where the problem is, and this is what this scanner does for you.

For SRS System Diagnostic:SRS, safety restraint system, is made up of impact sensors, a control module, and the airbags themselves, and this diagnostic device can detect every electronic parameter to check its health status.

All 10 modes of OBDII test for a complete diagnosis via Launch CRP123 :

Reading Codes:Show the detailed description of the Diagnostic Trouble Code (DTCs)
Erasing Codes & Reset:Turns off Check Engine Light (MIL), clears codes and resets monitors.
Data Stream:Reads and displays live ECU/PCM data stream, plotting functions graphically and stores freeze frame data.
I/M Readiness Status:Shows whether the various emissions-related systems on the vehicle are operating properly and are ready for inspection and maintenance testing.
Read Live Data Stream:Show the information of continuous data stream from a vehicle in live graphic (waveform) display.
View Freeze Frame Data:Check the certain vehicle conditions which are recorded by the on-board computer at the time the emission-related fault occurs.
O2 Sensor Test:Allows retrieval and viewing of O2 sensor monitor test results for the most recently performed tests from the vehicles on-board computer.
On-Board Monitor Test:Retrieves and displays test results for emission-related powertrain components and systems.
Read Vehicle Information:Display the information such as VIN (Vehicle Identification Number), CID (Calibration ID) and CVN (Calibration verification number), etc.
Component Test:Certain vehicle components can be actuated by commands sent from the scanner to test their operability

Extensive Vehicle Coverage:

For ACURA, For AUDI, For AUSTFORD, For BENZ, For BMW, For CHRYSLER, For CITROEN, For EUROFORD, For FIAT, For GM, For HOLDEN, For HONDA, For HYUNDAI, For INFINITI, For ISUZU, For JAGUAR, For KIA, For LAND ROVER, For LEXUS, For MAZDA, For MERCEDES, For MITSUBISHI, For NISSAN, For OPEL, For PEUGEOT, For PORSCHE, For RENAULT, For SAAB, For SCION, For SEAT, For SKODA, For SMART, For SPRINTER, For SUBARU, For SUZUKI, For TOYOTA, For USA FORD, For VOLVO, For VW

How to Use Launch CRP123 Fast

Step 1 :Connect the obdii cable with Launch CRP123
Step 2 :Turn on ignition and engine fully , Plug 16pin OBDII Connector to Vehicle
Step 3 :Click to Run "Diagnsotic" Button
Step 4 :Choose diagnostic module and brands software .

How to update launch crp123 scanner

Step 1:Connect the scanner with PC by Card Reader. Enter the device menu "Help--Tool Information" and take a photo to record the information displayed.
Step 2:Download update software from link which in manual on computer.
Step 3:Click the "Update Tool Setup.exe" and follow the message to install the client software on computer.
Step 4:Insert the TF card into the card reader and insert the card reader into your PC port. It will read the product "Serial Number" automatically.
Step 5:Hit "Device Upgrade" to enter the register page, type your info , check the "Register Code" on the photo you take before.

How to Printer the diagnostic report of Launch CRP123 :

Step 1 :Connect CRP123 to Computer via USB cable .
Step 2 :Open Update tool , Find "Printer Manager", enter
Step 3 :CRP123 go to "Dianostic"- "Review"- "Upload Record" , choose the data you want print to Upload .
Step 4 :After Upload , you can see the date in "Printer Manager", choose print , it will be ok !

LAUNCH CRP123 Packing List:

1. LAUNCH CRP123 ODB II Scanner
2. USB Cable
3. OBD II Cable
4. Card Reader
5. User Manual
6. Installation / Registration Instructions

Write Your Own Review
You're reviewing:LAUNCH CRP123 OBD2 Automotive Scanner ABS SRS Airbag Transmission Engine Car Diagnostic Tool Multi-language
Your Rating

Copyright © 2011-present LEDsupermall.com. All rights reserved. pay by visapay by mastercardpay by jcbpay by paypal